当前位置:

首页 > 网络工程 > Linux 教程 >

k8s之pod生命周期

Pod生命周期

我们一般将pod对象从创建至终这段时间范围成为pod的生命周期，它主要包含以下的过程：

pod创建过程
运行初始化容器（init container）过程
运行主容器（main container）
- 容器启动后钩子（post start）、容器终止前钩子（pre stop）
- 容器的存活性检测（liveness probe）、就绪性检测（readiness probe）
pod终止过程

pod的创建和终止

pod的创建过程

用户通过kubectl或其他api客户端提交需要创建的pod信息给apiserver
apiserver开始生成pod对象的信息，并将信息存入etcd，然后返回确认信息至客户端
apiserver开始反映etcd中pod对象的变化，其他组件使用watch机制来跟踪检查apiserver上的变动
scheduler发现有新的pod对象要创建，开始为pod分配主机并将结果信息更新至apiserver
node节点上的kubectl发现有pod调度过来，尝试调用docker启动容器，并将结果返回送至apiserver
apiserver将接收到的pod状态信息存入etcd中

pod的终止过程

用户向apiserver发送删除pod对象的命令
apiserver中的pod对象信息会随着时间的推移而更新，在宽限期内（默认30s），pod被视为dead
将pod标记为terminating状态
kubelet在监控到pod对象转为terminating状态的同时启动pod关闭进程
端点控制器监控到pod对象的关闭行为时将其从所有匹配到此端点的service资源的端点列表移除
如果当前pod对象定义了prestop钩子处理器，则在其标记为terminating后即会以同步的方式启动执行
pod对象中的容器进程收到停止信号
宽限期结束后，若pod中还存在仍在运行的进程，那么pod对象会收到立即终止的信号
kubelet请求apiserver将此pod资源的宽限期设置为0从而完成删除操作，此时pod对于用户已不可见

初始化容器

初始化容器是在pod的主容器启动之前要运行的容器，主要是做一些主容器的前置工作，它具有两大特征

初始化容器必须运行完成直至结束，若某初始化容器运行失败，那么k8s需要重启它直到成功完成
初始化容器必须按照定义的顺序执行，当仅当前一个执行成功之后，后面的一个才能运行

初始化容器有很多的应用场景，下面列出的是最常见的几个

提供主容器镜像中不具备的工具程序或自定义代码
初始化容器要先于应用容器串行启动并运行完成，因此可用于延后应用容器的启动直至其依赖的条件得到满足

接下来做一个案例，模拟下面这个需求

假设要以主容器来运行nginx，但是要求在运行nginx之前要能够连接上mysql和redis所在服务器

为了简化测试，事先规定好mysql和redis服务器的地址

创建pod-initcontainer.yaml，内容如下：

apiVersion: v1
kind: Pod
metadata: 
  name: pod-initcontainer
  namespace: dev
  labels:
    user: ayanami
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
  initContainers:
  - name: test-mysql
    image: busybox:1.30
    command: ['sh','-c','until ping 192.168.145.231 -c 1; do echo waiting for mysql...;sleep 2; done']
  - name: test-redis
    image: busybox:1.30
    command: ['sh','-c','until ping 192.168.145.232 -c 1; do echo waiting for redis...;sleep 2; done']

运行配置文件

[root@master ~]# vim pod-initcontainer.yaml
[root@master ~]# kubectl create -f pod-initcontainer.yaml 
pod/pod-initcontainer created
[root@master ~]# kubectl get pod pod-initcontainer -n dev
NAME                READY   STATUS     RESTARTS   AGE
pod-initcontainer   0/1     Init:0/2   0          20s

发现container一直处于初始化状态

此时添加ip地址（注：ens32是你的网卡的名字，不同机器可能不同，可以用ifconfig查看）

[root@master ~]# ifconfig ens32:1 192.168.145.231 netmask 255.255.255.0 up
[root@master ~]# ifconfig ens32:2 192.168.145.232 netmask 255.255.255.0 up
[root@master ~]# kubectl get pod pod-initcontainer -n dev
NAME                READY   STATUS    RESTARTS   AGE
pod-initcontainer   1/1     Running   0          19m

发现pod跑起来了

钩子函数

钩子函数能够感知自身生命周期中的事件，并在相应的时刻到来时运行用户指定的程序代码

k8s在主容器的启动之后和停止之前提供了两个钩子函数

post start：容器创建之后执行，如果失败了会重启容器
pre stop：容器终止之前执行，执行完成之后容器将成功终止，在其完成之前会阻塞删除容器的操作

钩子处理器支持使用下面三种方式定义动作：

Exec命令：在容器内执行一次命令

......
  lifecycle:
    postStart:
      exec:
        command:
        - cat
        - /tmp/healthy
......

TCPSocket：在当前容器尝试访问指定的socket

......
  lifecycle:
    postStart:
      tcpSocket:
        port: 8080
......

HttpGet：在当前容器中向某url发起http请求

......
  lifecycle:
    postStart:
      httpGet:
        path: #uri地址
        port:
        host: 
        scheme: HTTP  #支持的协议，http或者https
......

下面演示钩子函数的使用

创建pod-hook-exec.yaml文件，内容如下：

apiVersion: v1
kind: Pod
metadata: 
  name: pod-hook-exec
  namespace: dev
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
    lifecycle:
      postStart:
        exec: #在容器启动的时候执行一个命令，修改掉nginx的默认首页内容
          command: ["/bin/sh","-c","echo postStart... > /usr/share/nginx/html/index.html"]
      preStop: #在容器停止之前停止nginx服务
        exec:
          command: ["/usr/sbin/nginx","-s","quit"]

使用配置文件

[root@master ~]# vim pod-hook-exec.yaml
[root@master ~]# kubectl create -f pod-hook-exec.yaml 
pod/pod-hook-exec created
[root@master ~]# kubectl get pod pod-hook-exec -n dev -o wide
NAME            READY   STATUS    RESTARTS   AGE   IP            NODE    NOMINATED NODE   READINESS GATES
pod-hook-exec   1/1     Running   0          43s   10.244.2.22   node1   <none>           <none>
[root@master ~]# curl 10.244.2.22:80
postStart...

容器探测

容器探测用于检测容器中的应用实例是否能正常工作，是保障业务可用性的一种传统机制。如果经过探测，实例的状态不符合预期

，那么K8S就会把该问题实例“摘除”，不承担业务流量，k8s提供了两种探针来实现容器探测，分别是：

liveness probes：存活性探针，用于检测应用实例当前是否处于正常运行状态，如果不是，k8s会重启容器
readiness probes：就绪性探针，用于检测应用实例当前是否可以接受请求，如果不能，k8s不会转发流量

即livenessProbe决定是否重启容器，readinesProbe决定是否将请求转发给容器

上面两种探针目前均支持三种探测方式：

Exec命令：在容器内执行一次命令，如果命令执行的退出码为0，则认为程序正常，否则不正常

......
  livenessProbe:
      exec:
        command:
        - cat
        - /tmp/healthy
......

TCPSocket：将会尝试访问同一个用户容器的端口，如果能够建立这条连接，则认为程序正常，否则不正常

......
  livenessProbe:
      tcpSocket:
        port: 8080
......

HTTPGet：调用容器内Web应用的URL，如果返回的状态码在200和399之间，则认为程序正常，否则不正常

......
  lifecycle:
    postStart:
      httpGet:
        path: #uri地址
        port:
        host: 
        scheme: HTTP  #支持的协议，http或者https
......

下面以liveness probes为例，做几个演示：

方式一：EXEC

创建pod-liveness-exec.yaml

apiVersion: v1
kind: Pod
metadata: 
  name: pod-liveness-exec
  namespace: dev
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
    livenessProbe:
      exec:
        command: ["/bin/cat","/tmp/hello.txt"] #执行一个查看文件的命令

使用配置文件

[root@master ~]# vim pod-liveness-exec.yaml
[root@master ~]# kubectl create -f pod-liveness-exec.yaml 
pod/pod-liveness-exec created
[root@master ~]# kubectl get pod pod-liveness-exec -n dev 
NAME                READY   STATUS    RESTARTS   AGE
pod-liveness-exec   1/1     Running   1          102s

发现pod重启了一次，查看错误信息

[root@master ~]# kubectl describe pod pod-liveness-exec -n dev
  Type     Reason     Age                  From               Message
  ----     ------     ----                 ----               -------
  Normal   Scheduled  <unknown>            default-scheduler  Successfully assigned dev/pod-liveness-exec to node1
  Normal   Pulled     49s (x4 over 2m20s)  kubelet, node1     Container image "nginx:1.17.1" already present on machine
  Normal   Created    49s (x4 over 2m20s)  kubelet, node1     Created container main-container
  Normal   Started    49s (x4 over 2m20s)  kubelet, node1     Started container main-container
  Normal   Killing    49s (x3 over 109s)   kubelet, node1     Container main-container failed liveness probe, will be restarted
  Warning  Unhealthy  39s (x10 over 2m9s)  kubelet, node1     Liveness probe failed: /bin/cat: /tmp/hello.txt: No such file or directory

修改文件内容

apiVersion: v1
kind: Pod
metadata: 
  name: pod-liveness-exec
  namespace: dev
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
    livenessProbe:
      exec:
        command: ["/bin/ls","/tmp/"] #执行一个查看文件的命令

使用配置文件

[root@master ~]# vim pod-liveness-exec.yaml 
[root@master ~]# kubectl delete -f pod-liveness-exec.yaml 
[root@master ~]# kubectl create -f pod-liveness-exec.yaml 
pod/pod-liveness-exec created
[root@master ~]# kubectl get pod pod-liveness-exec -n dev
NAME                READY   STATUS    RESTARTS   AGE
pod-liveness-exec   1/1     Running   0          84s

说明没有重启

方式二：TCPSocket

创建pod-liveness-tcpsocket.yaml

apiVersion: v1
kind: Pod
metadata: 
  name: pod-liveness-tcpsocket
  namespace: dev
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
    livenessProbe:
      tcpSocket:
        port: 8080  #尝试访问8080端口

使用配置文件

[root@master ~]# vim pod-liveness-tcpsocket.yaml
[root@master ~]# kubectl create -f pod-liveness-tcpsocket.yaml 
pod/pod-liveness-tcpsocket created
[root@master ~]# kubectl get pod pod-liveness-tcpsocket -n dev
NAME                     READY   STATUS    RESTARTS   AGE
pod-liveness-tcpsocket   1/1     Running   1          29s

[root@master ~]# kubectl describe pod pod-liveness-tcpsocket -n dev
Events:
  Type     Reason     Age                  From               Message
  ----     ------     ----                 ----               -------
  Normal   Scheduled  <unknown>            default-scheduler  Successfully assigned dev/pod-liveness-tcpsocket to node1
  Normal   Pulled     43s (x4 over 2m10s)  kubelet, node1     Container image "nginx:1.17.1" already present on machine
  Normal   Created    43s (x4 over 2m10s)  kubelet, node1     Created container main-container
  Normal   Started    43s (x4 over 2m10s)  kubelet, node1     Started container main-container
  Normal   Killing    43s (x3 over 103s)   kubelet, node1     Container main-container failed liveness probe, will be restarted
  Warning  Unhealthy  33s (x10 over 2m3s)  kubelet, node1     Liveness probe failed: dial tcp 10.244.2.25:8080: connect: connection refused

更改文件内容

apiVersion: v1
kind: Pod
metadata: 
  name: pod-liveness-tcpsocket
  namespace: dev
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
    livenessProbe:
      tcpSocket:
        port: 80  #尝试访问80端口

重新使用配置文件

[root@master ~]# vim pod-liveness-tcpsocket.yaml 
[root@master ~]# kubectl delete -f pod-liveness-tcpsocket.yaml 
pod "pod-liveness-tcpsocket" deleted
[root@master ~]# kubectl create -f pod-liveness-tcpsocket.yaml 
pod/pod-liveness-tcpsocket created
[root@master ~]# kubectl get pod pod-liveness-tcpsocket -n dev
NAME                     READY   STATUS    RESTARTS   AGE
pod-liveness-tcpsocket   1/1     Running   0          18s

表明没有问题

方式三：HTTPGet

创建pod-liveness-httpget.yaml

apiVersion: v1
kind: Pod
metadata: 
  name: pod-liveness-httpget
  namespace: dev
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
    livenessProbe:
      httpGet: #其实就是访问http://127.0.0.1:80/hello
        scheme: HTTP #支持的协议，http或https
        port: 80
        path: /hello #uri地址

使用配置文件

[root@master ~]# vim pod-liveness-httpget.yaml
[root@master ~]# kubectl create -f pod-liveness-httpget.yaml 
pod/pod-liveness-httpget created
[root@master ~]# kubectl get pod pod-liveness-httpget -n dev
NAME                   READY   STATUS    RESTARTS   AGE
pod-liveness-httpget   1/1     Running   1          75s
[root@master ~]# kubectl describe pod pod-liveness-httpget -n dev
Events:
  Type     Reason     Age                From               Message
  ----     ------     ----               ----               -------
  Normal   Scheduled  <unknown>          default-scheduler  Successfully assigned dev/pod-liveness-httpget to node2
  Normal   Pulled     18s (x3 over 74s)  kubelet, node2     Container image "nginx:1.17.1" already present on machine
  Normal   Created    18s (x3 over 74s)  kubelet, node2     Created container main-container
  Normal   Killing    18s (x2 over 48s)  kubelet, node2     Container main-container failed liveness probe, will be restarted
  Normal   Started    17s (x3 over 73s)  kubelet, node2     Started container main-container
  Warning  Unhealthy  8s (x7 over 68s)   kubelet, node2     Liveness probe failed: HTTP probe failed with statuscode: 404

可以看见pod在重启，详细描述说明没找到这个网址

修改配置文件

apiVersion: v1
kind: Pod
metadata: 
  name: pod-liveness-httpget
  namespace: dev
spec:
  containers:
  - name: main-container
    image: nginx:1.17.1
    ports: 
    - name: nginx-port
      containerPort: 80
    livenessProbe:
      httpGet: #其实就是访问http://127.0.0.1:80/
        scheme: HTTP #支持的协议，http或https
        port: 80
        path: / #uri地址

重新使用配置文件

[root@master ~]# kubectl delete -f pod-liveness-httpget.yaml 
pod "pod-liveness-httpget" deleted
[root@master ~]# kubectl create -f pod-liveness-httpget.yaml 
pod/pod-liveness-httpget created
[root@master ~]# kubectl get pod pod-liveness-httpget -n dev
NAME                   READY   STATUS    RESTARTS   AGE
pod-liveness-httpget   1/1     Running   0          24s
Events:
  Type    Reason     Age        From               Message
  ----    ------     ----       ----               -------
  Normal  Scheduled  <unknown>  default-scheduler  Successfully assigned dev/pod-liveness-httpget to node2
  Normal  Pulled     27s        kubelet, node2     Container image "nginx:1.17.1" already present on machine
  Normal  Created    27s        kubelet, node2     Created container main-container
  Normal  Started    27s        kubelet, node2     Started container main-container

表明配置没有问题

其他配置

至此，已经使用liveness probe演示了三种探测方式，但是查看livenessProbe的子属性，会发现除了这三种方式，还有一些其他的配置，在这里一并解释下

[root@master ~]# kubectl explain pod.spec.containers.livenessProbe
KIND:     Pod
VERSION:  v1

RESOURCE: livenessProbe <Object>

DESCRIPTION:
     Periodic probe of container liveness. Container will be restarted if the
     probe fails. Cannot be updated. More info:
     https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

     Probe describes a health check to be performed against a container to
     determine whether it is alive or ready to receive traffic.

FIELDS:
   exec    <Object>
     One and only one of the following should be specified. Exec specifies the
     action to take.

   failureThreshold    <integer>
     Minimum consecutive failures for the probe to be considered failed after
     having succeeded. Defaults to 3. Minimum value is 1.

   httpGet    <Object>
     HTTPGet specifies the http request to perform.

   initialDelaySeconds    <integer>
     Number of seconds after the container has started before liveness probes
     are initiated. More info:
     https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

   periodSeconds    <integer>
     How often (in seconds) to perform the probe. Default to 10 seconds. Minimum
     value is 1.

   successThreshold    <integer>
     Minimum consecutive successes for the probe to be considered successful
     after having failed. Defaults to 1. Must be 1 for liveness and startup.
     Minimum value is 1.

   tcpSocket    <Object>
     TCPSocket specifies an action involving a TCP port. TCP hooks not yet
     supported

   timeoutSeconds    <integer>
     Number of seconds after which the probe times out. Defaults to 1 second.
     Minimum value is 1. More info:
     https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes